Spare Underfloor Storage Net: Install and Use
By Tentsile | The Original Tree Tent & Camping Hammock | Published: 2026-10-26
Category: How-to Guides
Learn how to install and use the spare underfloor storage net for your Tentsile tree tent, including compatibility with Gen 3.0 products and common mistakes to avoid.
Quick Answer
To install the spare underfloor storage net on your Tentsile tree tent, ensure your tent is Gen 3.0 compatible, then attach the net to the underfloor attachment points following the steps below.
Why Choose a Spare Underfloor Storage Net?
The underfloor storage net adds valuable storage space beneath your tree tent, keeping gear off the floor and within easy reach. It's particularly useful for items you want quick access to, like shoes or a water bottle, without cluttering your sleeping area.
Before purchasing, note that this spare net is only compatible with Gen 3.0 products. If your tent is an older generation, it won't fit correctly, so check your model's generation before ordering.
Compatibility Check
The most common mistake is assuming all Tentsile tents support the underfloor net. Only Gen 3.0 tents have the necessary attachment points. Look for the generation label on your tent's packaging or manual, or contact the manufacturer if unsure.
If you're buying a spare net to replace a lost or damaged one, verify that your tent is Gen 3.0 before you order. The net's design is tailored to these models, and using it on an older tent could void your warranty or damage the net.
Installation Steps
- Step 1: Confirm compatibility: Check that your tree tent is a Gen 3.0 model. Look for the generation label on the tent's main seam or manual. If you're unsure, contact Tentsile support before proceeding. Using the net on a non-Gen 3.0 tent may not fit properly and could void your warranty.
- Step 2: Gather the net and tent: Unpack the spare underfloor storage net and your tree tent. Lay the tent flat on a clean, dry surface, with the underside facing up. This makes it easier to access the attachment points. Ensure the tent is clean and dry to avoid trapping moisture, which can lead to mold.
- Step 3: Locate the attachment points: Find the attachment points on the underside of the tent floor. These are typically reinforced loops or clips positioned near the corners and edges. Refer to your tent's manual if the points are not obvious. If you can't find the attachment points, your tent may not be Gen 3.0 – double-check compatibility.
- Step 4: Attach the net: Starting at one corner, clip or tie the net's connectors to the attachment points. Work your way around, ensuring the net is evenly tensioned. Avoid over-tightening, as this can stress the fabric. Uneven tension can cause the net to sag and reduce storage capacity.
- Step 5: Test the net: Gently pull on the net to test its security. Place a lightweight item inside to see how it holds. If the net feels loose or the connectors slip, re-adjust the tension before use. A secure net prevents items from falling out during wind or movement.
Product Facts
- Spare Underfloor Storage Net: This underfloor storage net is only compatible with Gen 3.0 products. Ensures you purchase the correct spare part for your tree tent, avoiding fit issues and potential damage.
Spare Underfloor Storage Net
